|
News... |
|
Home | News | Contact Us | Controls | Sensors | Metering | Power & Switching | Valves/Actuators | Security | Rewards |
|
Home |
|
News |
|
Contact |
|
Controls |
|
Sensors |
|
Metering |
|
Power & Switching |
|
Valves/Actuators |
|
Security |
|
Rewards |
|
14 August, 2010 - BACnet Test Labs (BTL) Listing for HP_BN Series Devices
We are pleased to announce the BTL Listing of our BACnet MS/TP device ranges HPC, HPD0460, HPE and HPV devices
Data sheets are now updated to reflect the listed status and include some new functional features for Firmware Version 4:
· HPE8884BN and HPC8884BN; Digital Inputs (DI) may now be configured as Normally Closed (n/c). This means you no longer need to use Digital Logic function blocks to invert a n/o DI (previously only UI had the n/c setting feature) · HPD0460BNC, T & CT versions; Digital Logic (DL) & Analogue Logic (AL) increase from 4 to 8 blocks available for each · HPD0460BNC & CT versions; Control Loop (CL) function blocks increase from 4 to 8 available · All devices; now feature a Factory Default (FD) reset command to avoid having to download FD file before changing the program settings of a previously programmed device
14 July, 2010 - New Product Releases
PMAC735 - Class 1.0, 5Amp CT connected three phase flush panel meter with Modbus RTU comms. Four quadrant metering and analysis data including harmonics up to the 31st. Data sheet
4 May, 2010 - New Product Releases
PMAC901 - Class 1.0, 100Amp single phase electricity meter with Modbus RTU comms. DIN rail mount housing. Data sheet PMAC903 - Class 1.0, 100Amp three phase electricity meter with Modbus RTU comms. DIN rail mount housing. Data sheet
WMS1 - Webserver building Management System. Easy configuration of up to 2,000 system points (devices/objects/graphics/schedules/trends/alarms). As well as imbedded IP protocols, chose up to two modules of; BACnet RS485, Modbus RTU RS485, LonWorks. Brochure
8 April, 2010 - New Product Releases
12 point I/O module for Modbus RTU: HPE0662MR data sheet
Six channel interposing relays module HPR6 data sheet & overview
DIN rail adapters, HDA0xxx, for converting our HPC, HPD, HPE, HPR6 or HPV devices for DIN rail installation. Or convert other manufacturers devices. See the product notes
28 January, 2010
HPE-P1MOD2 Modbus RTU gateway for P1 FLN data sheet is updated. Go to the Controllers page for download.
28 January, 2010
MGS sensors for refrigerant gas, toxic and other gases. Go to the Sensors page for download.
13 January, 2010
Seat valve & actuators data sheets added to VAC page. Butterfly valves, DN150...500 updated, also on VAC page.
3 December, 2009
Energy (BTU) Metering: A new and comprehensive manual for the SuperCal 531 energy integrator can be located on the Metering page.
Electricity Metering: Current transformers with 5Amp secondary with primary currents from 50...1200 Amp can now be found on the Metering page. Look for the D363 and MES60 range links.
30 October, 2009
E380 VFD: We have included a separate document for the Modbus RTU protocol. Go to the Power & Switching page to download.
HPE-BNMOD Modbus <> BACnet gateway: Revision of the address mapping tool to accommodate the E380 VFD. No changes that you will notice but this version will make data base creation smoother than with the previous version. Go to the Controllers page for download.
28 October, 2009
We’ve added the data sheets for the WS… range of weather station equipment, including devices for individual sensing of wind or rain aspects to covering all environmental conditions in one device (wind speed & direction, rain presence, solar levels, temperature & humidity)
Go to the Sensors page for download.
26 October, 2009
All DDC data sheets, BACnet and P1 FLN, updated to include instruction for setting universal inputs as Digital Normally-Closed (valid for firmware delivered from 17th October), inclusion of instruction for use of shielded cabling for connection of sensors and corrections such as for the method for setting input filtering for unstable sensors.
Go to the Controllers page for download.
22 September, 2009
FuncProg updated to include new ‘Type 14’ sensor setting of UI’s for configuration of UI as Digital Normally-Closed. Go to the Controllers page for download.
18 September, 2009
A fine range of Variable Frequency Drives, the E380, now available. Fully featured with Modbus RTU communication, PID controller and remote locatable operating panel. Go to the Power & Switching page to download the brochure
3 September, 2009
Sontex Superstatic 440 approval for Class 2.0 BTU metering included on the Metering page. Data sheets and installation sheets for SS440 and SuperCal 351 energy integrator are updated with comprehensive information to assist you in your planning and implementation. SS440 range increase; DN500, 1,500m3/h available!
4 August, 2009 - Some additions to our range of sensor mounting accessories for energy (BTU) meters. Please go to the Metering page to download a summary sheet.
Note that protection pockets are not listed in the summary as they are generally delivered as part of the metering sets.
27 April, 2009 - Release of the new P1 compatible HPD0460P1 series of programmable room units. The HPD0460P1 units provide user interface options to display and control network points using the network’s field panel as the router locally or to other networks in the system. Options include integrated 8 loop PI controller for applications such as FCU or unit vent control and/or 365 day calendar / time switch
Data sheet updates for P1 and BACnet versions of HPE8884, HPC8884, HPC0662 and HPV0662 to align all with the latest Version 3.61 firmware.
All these updates now available on the Controllers page
.24 April, 2009
1) HPE-BNMOD new address mapping tool including user Scaling Table and related download data table added. In the new tool you may freely create Modbus RTU device register scaling and then assign the scaling values to the related objects in the main object database table before final download to the HPE-BNMOD 2) HPE-BNMBUS updated datasheet added including installation notes in the connections section 3) HPE-P1MBUS updated datasheet added including installation notes in the connections section
These updates and more can be found on the Controllers Page
18 April, 2009
1) HPE-BNMOD Modbus RTU gateway for BACnet now has complete user configurable scaling so read values can appear at the BMS without any further need of manipulation Controllers Page 2) Single phase Solid State Relay (SSR) data sheet updated to document the true output voltage rating of 440Vac (previously incorrectly stated as 230Vac) Power & Switching Page
|
